From carrying heavy construction equipment to your expensive furniture, your truck goes through a lot to make your life easier. So, it’s only fair that you give something back.
The floor bed of the truck is one of the most ignored areas. However, this is the floor that does the heaviest lifting. Having to carry different equipment, makes the floor bed prone to scratches and scuff, these are likely to corrode over time and can empty your pockets.
What’s the solution, you ask? Well, it’s basic; prevent the damage before it even takes place. Applying the best spray can bedliner onto your truck’s floor, will allow you to make sure the surface remains scratch and scuff proof, for a fraction of the cost. So, what’s the wait to choosing the best bedliner for your truck!
Top 3 Best Bed Liner Spray Can On The Market – Comparison Table:
What to Look for before Buying Bed Liner Spray Can
Before you start off making your purchase if you’re unsure what to look for, go through this buying guide. We’ve provided all the details that’ll help you to better understand your needs and will help you make a purchase accordingly.
Each company has a different formula applied when developing the product, with each giving a slightly different advantage. So, it essential you focus on what your needs are before considering the purchase.
If you’re out looking for durability, then almost all compounds provide a similar experience. However, BAK2010, comes with Dupont is a mixture that includes Kevlar; this greatly increases the durability provided. Making your trucks resistant to extreme scratches and scuffs from heavyweight cargo.
Some applicants are also water-based; this makes them less toxic, odorless, and easier to use. They’ll also allow you to quickly clean up any excess spots, while wet. However, if you’re looking for a product that provides overall performance, any urethane-based bedliner should do the trick.
Ease of Application
If you’re conducting a DIY application process and have little or no experience, you’re going to want to find a product that is easy to apply. However, before any form of application, you’ll have to prep your vehicle. Cover the entire truck with plastic wrap and tape, except regions you want to apply the solution to.
While buying the solution making sure it’s easy to apply, some solution you can use straight out of the can. However, others will require you to mix other compounds together in certain ratios, this might be a little tricky for beginners, so it’s better to choose the former.
Some applicants come with a roll-on application process, even though this will give a more professional appeal, it can be difficult to apply. Rather choose ones that include a spray gun for more efficient applications.
Most of these products are going to serve you for a lifetime, so it’s better to treat them as an investment. However, before going out to buy the best spray-on bedliner kit, keep a budget of $150 in mind.
Top 5 Best Bed Liner Spray Can Reviews
With the market flooded with different brands, it can be a bit overwhelming for you to find one that supports your needs best. Which is why we’ve done some digging for you, we’ve found 5 of the best products currently available in the market. We can guarantee that these will not disappoint!
1. U-Pol Raptor Black Urethane Spray-On Truck Bedliner Kit
Having a product that does much more than what you bought it for is always a blessing. For the Raptor, this comes with its multi-surface application. The spray-on protective coating works on various surfaces including, truck beds, wood, concrete, metal, aluminum fiberglass, etc.
And the protective urethane coating is formulated to provide the toughest of solutions for abrasion, stain, and dent problems. Once applied onto your truck, you won’t have to worry about its floor bed ever again.
Additionally, the coating also creates a surface that can tackle almost any form of weather. Its UV and moisture protection provide a great addition to those of us living in harsh tropical climates, keeping the floor safe from corrosion and dampening.
If you’re someone who likes to DIY, then this product’s perfect for you! It comes with its own spray gun for easy application, all you have to do it mix in 3 parts liner with 1-part hardener and you’re good to go. Moreover, you’re also getting a wide color palette to choose from, making it even more interesting.
On another note, the application will also make your entire trucking experience better. The cargo you’re holding will remain stable, create less noise, and stay vibration-free. The price may be a tad bit steeper than other applicants; however, if you consider this as an investment, then the returns you’re getting are much greater.
- Quick-dry solution
- Wide range of colors to choose from
- Improves driving experience
- Enough applicant for dual coats or recoating
- You’ll need an air compressor for the spray to work
- Extra adapters and piping required
2. HERCULINER Black Truck Bedliner Kit
When you’re applying chemical-based compounds on your expensive vehicles, you’ll always be a bit skeptical. However, this isn’t something you’ll have to worry about with the Herculiner, boasting its 12 years of industry leadership, this is a product trusted by all.
It gains this trust by forming a highly durable coating, once applied, the bed of your truck will become scratch, scuff, and dent-proof. With a 5 times denser solution, all you need is a single coat to last you a lifetime.
Furthermore, the solution is completely weatherproof, meaning even in horrid rains, snow, or heat, the coating will not break apart. Being made of a polyurethane compound makes this solution waterproof, this kicks off any chance or corrosion. Easy application is another region where the company tops out.
With other brands, you have to make a mixture of certain compounds to get the final product. However, in this case, there’s no mixing involved; it is one single solution. The packaging includes a roll-on method for a professional look. Still, the solution is also applicable using a spray can.
While the solution is made mainly to serve as a bedliner, its versatility allows you to use it on various other materials as well. A multi-surface bedliner of such high grade, priced at an affordable rate, really gives you that bang for the buck kind of experience.
- 12 years of experience
- Versatile material
- Can handle extreme weather
- 5 times thicker solution
- Extremely easy application
- Does not come with its own spray can
- The rollers and paintbrush provided are inefficient to work with
3. Dupli-Color BAK2010 Bed Liner with Bed Armor Kit
If durability and the lifespan that you’re getting from the protective coating are a large concern for you, then this kit should mitigate all those concerns. The BAK2010 is known for being the market leader when it comes to durability, a trust that the company has earned over the years.
Formulated using Dupont, a chemical that contains Kevlar makes this product tougher than all its competitors. The solution has been tried and tested, allowing you to carry the heaviest of loads with the roughest of surfaces without getting a single scratch or stain on the bed floor of your truck.
Ease of application is another factor that sets this kit apart. With the kit, you’ll be getting a roll-on brush, scuff pads, and other application essentials. However, you’ll also be able to use a spray can for quicker application. Moreover, being a water-based solution allows for an easy-to-clean and an odor-free job.
Additionally, rubber particles mixed into the solution will create greater friction on the bed of your truck. Greater friction keeps cargo stable and reduces vibration and noise.
These rubber particles further make the truck bed weatherproof, removing the chance of corrosion and dampening, increasing the lifespan of your truck. What surprising is, even after providing all this, the product is one of the cheapest in the market.
- Highly affordable
- Contains Kevlar for extreme durability
- Easy to apply
- Oder-less and easy to clean
- Resistant to harmful chemicals
- No spray gun included
- Rubbery coat
4. Custom Coat GM White 1.31 Gallons Urethane Spray-On Truck Bed Liner Kit
Many opt to chip out hundreds of dollars to get a professional bed lining job done. Our question is, why spend this much when you can do the same professional job right from home? Something, made possible by Custom Coat’s exceptional standard product line.
The coat doesn’t only provide that glistening shine, the premium urethane solution is designed to provide the highest quality covering. So, this coating is not only scratch-proof and impact-proof, but you’re also getting weatherproofing.
Thus, the compound works exceptionally in keeping corrosion and rust out of your truck. The highly versatile nature of the product will allow you to cover your entire truck with the compound. So, you’ll be able to protect your truck, increase its lifespan, and also make it more aesthetically appealing.
In the kit, you’re getting 21 ounces of tintable solution, a few ounces of hardener, and 18 ounces of colored tint. Mixing all of these in the right amounts should give you a spray-on compound that can cover 200 square feet, with 10mils of thickness.
With such an abundant spread of compound available, you’ll be able to cover the entirety of your truck easily. The white color of the compound will give a shiny gloss, and its UV resistant structure will also keep your car cool. And the price for this kit is fairly higher; however, with 1.31 gallons, this price is justifiable.
- Compound to cover 200 square feet
- High-quality material
- Comes with free spray-on gun
- A wide array of colors to choose from
- Professional coat
- The application process is a bit lengthy and complex
- Fairly pricy
5. Custom Coat Black 0.875 Gallon Urethane Spray-On Truck Bed Liner Kit
For those of you that love that Black matte finish, this premium compound from Custom Coat is the perfect partner. It’ll not only give one of the smoothest finishes, but the compound will also indefinitely protect your truck.
Developed using high-grade urethane makes this compound extremely rigid and durable. You’re not going to have to worry about getting the floor bed of your truck scratched or scuffed up. Also, dents and impacts are something the compound can absorb fairly well, thus, allowing you to carry extremely heavy loads.
Furthermore, the surface of the compound develops a high friction surface, this allows cargo to stay in one place while on the drive. It also absorbs noise and vibration, making your driving experience even more soothing.
A unique ability that sets this solution apart from others is its flexible characteristics; this makes the compound resistant to chipping. Moreover, it is also weatherproof, meaning the coat can handle the harshest of rains or heat without breaking up. Also, you’ll be able to keep corrosion at bay.
Its versatile nature will allow you to apply the compound on various surfaces, including the body of the truck. With around 200 square feet of applicants available in the kit, you can easily give your truck a fresh look. Moreover, this kit is surprisingly priced on the more affordable end, giving you your money’s worth.
- Premium line DIY kit
- Durable coating
- Improve the driving experience
- Extensive coverage
- Comes with a spray-on gun for easy application
- The application process can be a bit time consuming
- There’s a slight learning curve required to get a good output
Frequently Asked Questions on Bed Liner Spray Can
Below are the most commonly asked queries regarding the best spray can bedliners:
- How to prep your truck before application?
Make sure that you completely clean out the truck and dry it off, tape off, or wrap any region that doesn’t need a coat. This basic guide should help you to get a clean and smooth coat onto your truck.
- How much time does it take to coat the bedliner?
This will depend on the method you’re using and the type of bedliner being used, as spray-on can’s are fairly quicker than roll-on. It will also depend on the amount of surface you’re covering. However, on average, these jobs can take at least 4-5 hours, so make sure you have some time in hand.
- Can bedliner solutions be removed?
Once the bedliner solidifies, removing it can be quite a demanding process, you may also end up damaging your truck. Therefore, even though it is possible, we recommend you be sure about your decision before applying.
- Do you need to have a compressor for a spray-on application?
Yes, spray-on applicants will use air pressure to push out the solution; without this, the spray gun will not operate.
- Can the job be done using a roller?
If you’re using a roller rather than a spray-on gun, you’ll be able to get a more accurate and professional outcome. However, it’s a very inefficient process and may double the time required.
Also Read :
While most applicants do provide a similar appeal to them, the slight differences can change the output substantially. So, when you’re out making your purchase, be sure to buy the best spray can bedliner that not only meets your needs but also goes beyond your expectations.